- 1 How do you glue threshold to concrete?
- 2 How do you secure a threshold?
- 3 Can you glue down a threshold?
- 4 Can I glue a transition strip?
- 5 How do you install a wood threshold?
- 6 What is the difference between a door sill and threshold?
- 7 What is a saddle type threshold?
- 8 Can you glue tack strips to concrete?
- 9 Can I put vinyl flooring on concrete?
- 10 How much space do you need for a transition strip?
How do you glue threshold to concrete?
PL Premium polyurethyne construction adhesive is the best glue on the face of the earth, IMO and will practically weld your wood threshold to the concrete. Squeeze a bead or three under where the thresh will go and smack it down into the glue. Weight it in place overnite and you be fine.
How do you secure a threshold?
Use adhesive to secure the threshold. Make sure the adhesive you choose is approved for use with both the threshold material and the floor material. Contact cement creates a strong, durable bond, but it won’t allow you reposition the threshold after you set it and apply pressure.
Can you glue down a threshold?
If the subfloor is concrete, you may need to glue the threshold down. To do this apply a strong adhesive to the edge of the wood flooring, and then place the threshold over the gap between the two sections of floor and push down on the piece to glue down.
Can I glue a transition strip?
You can attach the transition in one of two ways. You can glue it to the floor with liquid nails or you could use the track that comes with it to attach it. If you are using liquid nails, apply a bead of the liquid nails to the underside of the transition.
How do you install a wood threshold?
Installation: Lay threshold molding in place to determine a proper fit. The threshold molding should overlap the flooring by 1/2″ to 3/4″ leaving the balance for expansion. To attach the threshold, nail into the subfloor behind the lip of the molding. Be sure when nailing not to obstruct the floors expansion space.
What is the difference between a door sill and threshold?
DIY Frequently Asked Questions / What is the difference between the door sill and the threshold? The door sill is part of the frame structure of the door and sits under the door jamb. The threshold sits on top of the sill and performs the duty of making the door weathertight.
What is a saddle type threshold?
Saddle thresholds for commercial doors are a type of commercial door hardware that runs the width of the door and is mounted on the floor. A saddle threshold sits on the floor underneath the door when the door is closed.
Can you glue tack strips to concrete?
Diamond Member. You use concrete tack strips, same thing as regular but they have concrete nails instead.
Can I put vinyl flooring on concrete?
Concrete: Sheet vinyl can be installed over concrete if the surface of the concrete is clean, smooth and dry. Repair any holes or cracks. You can lower high spots with a grinder. Linoleum or Vinyl Flooring: Sheet vinyl can be laid over old linoleum or vinyl flooring if the existing floor is in good condition.
How much space do you need for a transition strip?
The standard width of a T-molding strip is 2 inches, and the standard height is 5/ 8 inch. The base of the T-shape can range from 1/ 2 inch to 3/4 inches wide. Leave a 1-inch space on the floor to accommodate the base of the T-molding strip.