Quick Answer: How Much Concrete Cost Per Square Foot?

How much does it cost to pour a 12×12 concrete slab?

How much does a 12×12 concrete slab cost? The average cost to pour a 12×12 concrete slab that is 4” thick is between $888 and $1,584, with professional labor and materials included.

How much does a 20×20 concrete patio cost?

Cost to Install Concrete Patio by Size

Size in Feet	Square Footage	Price Range
12×14	168	$1,400 – $4,000
15×15	225	$1,800 – $5,500
16×18	288	$2,300 – $7,200
20×20	400	$3,000 – $10,000

How much does it cost to pour a 40×60 concrete slab?

How much does a 40×60 concrete slab cost? It would be about $8,500 to $12,000 for a 40×60 foot concrete slab, 6 inches thick. That’s based on national averages of around $5 per square foot for a fully engineered, finished concrete slab, including labor and materials.

How much does 4 yards of concrete cost?

Each cubic yard of concrete costs $119 to $147 per cubic yard delivered. Short-Load Concrete Prices.

Cubic Yards	Mixing On-site Fees
4 – 4.75	$80
3 – 3.75	$90
2 – 2.75	$100
1 – 1.75	$110

Is it cheaper to pour concrete yourself?

One of the least expensive ways to get concrete is to mix your own. You can buy bags of the mix from a home improvement store. Typically, you only have to add water for it to be ready to pour. Otherwise, you risk getting a weaker concrete once it cures, which could lead to cracks or crumbles within a couple of years.

How many bags of concrete do I need for a 10×20 slab?

A 60-pound bag yields. 017 cubic yards, and an 80-pound bag yields. 022 cubic yards. For a 10 x 10 slab, you would need 77 60-pound bags or 60 80-pound bags.

How much does a 10×20 concrete patio cost?

Cost of concrete per square foot

Slab Size	Square Feet	Average Cost
10×20	200	$1,200
12×12	144	$864
15×15	225	$1,350
16×20	320	$1,920

Which is cheaper concrete or pavers?

As far as installation costs and concrete costs go, poured concrete is technically the most affordable per square foot. However, even though the upfront cost of pavers is higher, concrete pavers offer greater value and durability than poured concrete and stamped concrete.

Which is cheaper a concrete patio or deck?

Installing a patio flush to the ground can cost much less than a deck. At about $5 a square foot, concrete is usually the least expensive option. Patios are best suited for even ground and the cost of creating a level foundation is very high. Patios don’t require regular maintenance.

Is it cheaper to build a garage or buy a kit?

Cost Effective Garage kits are often less expensive than prebuilt garages. There are many options available, and it’s easy to find the garage that best suits your home and budget when you go with a kit. Because you will be doing all of the labor, there is, of course, no labor fees.

What is the difference between a concrete slab and a cement slab?

What is the difference between cement and concrete? Although the terms cement and concrete often are used interchangeably, cement is actually an ingredient of concrete. Concrete is a mixture of aggregates and paste. The aggregates are sand and gravel or crushed stone; the paste is water and portland cement.

How much does it cost to build a 30×40 garage?

The cost for straight wall metal garages starts at about $12 per square ft. Taking the roof into account, the cost of a 30’x40′ straight wall garage is about $14,400. Accessories and delivery will add another $3000 to this cost for a total estimate of $17,400.

Can I pour a 2 inch concrete slab?

If done properly, new concrete can often be poured right over an existing slab. For this to be feasible, the contractor needs to pour at least 2 inches thick, use smaller aggregate, and incorporate reinforcement such as welded wire mesh or fiber mixed into the concrete.

How much does 2 yards of concrete cost?

According to the NRMCA – Ready Mixed Concrete Industry Data Survey, the average cost of concrete in 2018 was $120 per cubic yard, or $240 for the 2 cubic yards needed for a typical 10-by-10-foot patio. Bulk Concrete Prices.

Cubic Yards	Price Range
1*	$140-$200
2 *	$280-$400
3*	$420-$600
4*	$560-$800

How do you estimate concrete?

How to calculate concrete:

1. Determine how thick you want the concrete.
2. Measure the length and width that you’d like to cover.
3. Multiply the length by the width to determine square footage.
4. Convert the thickness from inches to feet.
5. Multiply the thickness in feet by the square footage to determine cubic feet.