- 1 How much concrete do I need for a post hole?
- 2 Is 2 feet deep enough for fence posts?
- 3 How much post mix do I need per post?
- 4 Should posts be set in concrete?
- 5 Can you put dry concrete in a post hole?
- 6 How do I put a post in the ground without concrete?
- 7 Will wooden posts rot in concrete?
- 8 How deep should a 8 foot fence post be?
- 9 Should I use 4×4 or 6×6 fence posts?
- 10 How long does it take post mix to set?
- 11 What is the best concrete mix for fence posts?
- 12 How do you keep fence posts from rotting in concrete?
- 13 Why deck posts should not be set in concrete?
- 14 Does filling a post with concrete make it stronger?
- 15 How long will 4×4 post last in the ground?
How much concrete do I need for a post hole?
Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.
Is 2 feet deep enough for fence posts?
Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/ 2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet ).
How much post mix do I need per post?
You’ll need to bury the posts at least 2ft In the ground. As for how many bags of postcrete you need per post, that’s purely dependant on how big you make the post holes. As a rule of thumb, when using standard post hole diggers, I average 1 bag per post. For larger holes I would allow 1.5 bags to 2 bags per hole.
Should posts be set in concrete?
First rule, gang: Do not set wooden posts in concrete. Look, no matter what preventative steps you take (and I’ll get to those), eventually wooden posts rot, and eventually you’ll have to set new ones. Not only does burying them in concrete make for more work down the line, it actually can speed up the rotting.
Can you put dry concrete in a post hole?
Fast-setting concrete is ideal for setting posts because there’s no mixing— you simply pour the dry concrete from the bag right into the hole, then add water. Under normal curing conditions, you can apply heavy weight to the post (a basketball backboard, for example) after just 4 hours.
How do I put a post in the ground without concrete?
- Find a concrete surface and lightly tamp your digging iron against it.
- Remove the turf and topsoil from the site of the post.
- Dig the hole putting the displaced earth onto the tarp.
- Pour 4 inches of gravel into the hole.
- Place the post in the hole.
- Add another 2 inches of gravel around the base of the post.
Will wooden posts rot in concrete?
Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. The concrete at the top should be sloped away from the post to grade level to avoid water pooling around the base.
How deep should a 8 foot fence post be?
In general, holes should be at least 3 feet deep for posts that extend 8 feet or more above ground level. Posts that extend 6 feet above ground level should have holes at least 2 1/ 2 feet deep.
Should I use 4×4 or 6×6 fence posts?
4×4 is perfect for these very standard fence dimensions. Normally 4×6 or 6×6 are needed for gates or extreme wind loads.
How long does it take post mix to set?
A ready to use blend of selected sand, cement and additives formulated for fixing wooden, concrete and metal posts. With just the addition of water and with no mixing required; Postcrete sets in 10 minutes and comes in handy 20kg weatherproof, tear resistant plastic bags.
What is the best concrete mix for fence posts?
In terms of the ratio to use for a concreting fence posts, the best mix is a mix of 1:2:4 (1 cement, 2 sand, 4 aggregate). Concrete is always best mixed using a cement mixer to ensure it’s even, but if you only need to mix a little, hand mixing is ok (see mixing concrete project above for tips on how to do this).
How do you keep fence posts from rotting in concrete?
Caulk Around the Fence Post Base Apply high-quality exterior acrylic latex caulk, or silicone specifically designed to adhere to concrete, at the base of the post.
Why deck posts should not be set in concrete?
A deck post should always be placed on top of footing, not inside concrete because it can break. Concrete tends to absorb moisture and wood expands when it gets wet, so these two factors combined will result in the wood breaking the concrete.
Does filling a post with concrete make it stronger?
Filling with concrete is not as effective as increasing wall thickness or changing the shape, but it’s a proven technique.
How long will 4×4 post last in the ground?
The length of time that you can keep a treated post in the ground depends on a few different factors. Generally speaking, in the optimal conditions, it can last as long as 40 years. More commonly, though, it will last around 20 years.